MSExchangeTransport Event-ID 4000: Cannot send to Exch 2003

Andreas Raschle · Joined: 05 Aug 2007 Posts: 3

Have Exchange 2000 until now (source) and set up a new 2003 (destination) on
a new hardware with W2003 (DC)

Now I set up to replicate all Address books public folders, Free/Busy... as
desribbed in checklists exact for that task.

Unfortunately the replication does not run. The destination always has
replication Stat 'Local Modified'

I moved one Mailbox to the destination mailserver. Now users on the old
server cannot send mails to this user on the new server, but the one on the
new server can.

In the event viewer of the old server I get this error every 10 minutes:
Source: MSExchangeTransport
Event ID: 4000
Description: Message delivery to the remote domain 'vnforest.ucp' (the new
servers name) failed for the following reason: Unable to bind to teh
destination server in DNS.

I read lots of tasks about this, reinstalled Exchange 2000 and SP3 and so
on. Also cheched nslookup, works.

Is there any other idea what to try else? I am really confused and have no
more ideas.

Thanks for any advice or suggestions
--
Andreas Raschle
Swisscom Solutions AG

Archived from group: microsoft>public>exchange2000>transport

Leif Pedersen [MVP] · Joined: 05 Aug 2007 Posts: 94

Hi,

Could this be the problem: http://support.microsoft.com/?id=555366

Leif

"Andreas Raschle" skrev i en
meddelelse @microsoft.com...
> Have Exchange 2000 until now (source) and set up a new 2003 (destination)
on
> a new hardware with W2003 (DC)
>
> Now I set up to replicate all Address books public folders, Free/Busy...
as
> desribbed in checklists exact for that task.
>
> Unfortunately the replication does not run. The destination always has
> replication Stat 'Local Modified'
>
> I moved one Mailbox to the destination mailserver. Now users on the old
> server cannot send mails to this user on the new server, but the one on
the
> new server can.
>
> In the event viewer of the old server I get this error every 10 minutes:
> Source: MSExchangeTransport
> Event ID: 4000
> Description: Message delivery to the remote domain 'vnforest.ucp' (the new
> servers name) failed for the following reason: Unable to bind to teh
> destination server in DNS.
>
> I read lots of tasks about this, reinstalled Exchange 2000 and SP3 and so
> on. Also cheched nslookup, works.
>
> Is there any other idea what to try else? I am really confused and have no
> more ideas.
>
> Thanks for any advice or suggestions
> --
> Andreas Raschle
> Swisscom Solutions AG

Andreas Raschle · Joined: 05 Aug 2007 Posts: 3

Wow
it exactly was the problem. There is a server entry and that server could do
not anything do with the destination name. Now I have choosen the option
'first try to contact directly' which obviously takes a bit longer for the
other messages, but it works now for the message exchange.
And one other problem has gone as well:
All users on the new server got at the end of Outlook send/receive the error
'the operation failed. an object could not be found.
Every site in internet said that I have to recreate the profile, but that
was no solution. I then thought that somethin like the offline global address
book or free/busy schedule or whatever could be the problem.

Thank you very much for your help!
Cheers
Andreas
--
Andreas Raschle
Swisscom Solutions AG

> Could this be the problem: http://support.microsoft.com/?id=555366
> Leif

Lakshman · Joined: 06 Aug 2007 Posts: 7

It could be due to an incorrect route on the router configuration that cause
the traffic to use an incorrect route. Please check that

--
--
Please do not send email directly to this alias. This alias is for newsgroup
purposes only.

This posting is provided "AS IS" with no warranties, and confers no rights.

"Andreas Raschle" wrote:

> Have Exchange 2000 until now (source) and set up a new 2003 (destination) on
> a new hardware with W2003 (DC)
>
> Now I set up to replicate all Address books public folders, Free/Busy... as
> desribbed in checklists exact for that task.
>
> Unfortunately the replication does not run. The destination always has
> replication Stat 'Local Modified'
>
> I moved one Mailbox to the destination mailserver. Now users on the old
> server cannot send mails to this user on the new server, but the one on the
> new server can.
>
> In the event viewer of the old server I get this error every 10 minutes:
> Source: MSExchangeTransport
> Event ID: 4000
> Description: Message delivery to the remote domain 'vnforest.ucp' (the new
> servers name) failed for the following reason: Unable to bind to teh
> destination server in DNS.
>
> I read lots of tasks about this, reinstalled Exchange 2000 and SP3 and so
> on. Also cheched nslookup, works.
>
> Is there any other idea what to try else? I am really confused and have no
> more ideas.
>
> Thanks for any advice or suggestions
> --
> Andreas Raschle
> Swisscom Solutions AG

Andreas Raschle · Joined: 05 Aug 2007 Posts: 3

Hi
Thanks for your reply. As I have written in my reply (and voted too), the
solution from Leif Pedersen did help me (my server) out of further trouble.
Regards
Andreas

Event ID 7010 - 504 need to authenticate first We are running Exchange 2003. Certain hosts sending mail to us will always cause this event. The odd thing is that the email from some of these hosts always gets through and the email from some of these hosts never gets through. I have read the article "H

how to create a new event sink hello all, I have understood how to register a new event sink using smtpreg.vbs and to unregister it, but I have no idea how to implement a small function that, upon arrival of a new message to a recipient, a send mail notification to a different email ad

SMTP Event Sink: attachment removal Hi, Can someone help me, i need a script that will strip attachments from all outgoing mail to a specific domain ie "@orange.net" can this be done?

Certificate to be used to send email I am getting message outlook could not sign or encrypt this message because you have no certificates which can be used to send the email address. -- zareer

Unable to send email externally Hi all, I am runnning SBS 2003 and Exchange 2003 on the DC in a FE/BE I'm having some issues sending mail externally, I can send mail internally just fine but externally nothing. Everytime I try to send mail externally I get a Delivery Stat