Error installing SP1 of Exchange 2007

Elías Manchón · Joined: 05 Aug 2007 Posts: 3

Hi Folks,

I can't install the SP1 of Exchange 2007. In Prepare's phase of wizard, the
screen throught an error because of this equipe belong to domain that has a
DNS domain of simple label.

Is there some way to avoid this problem?, Must I try to change the DNS
domain?, How do I make this?

Thanks in Advance.

Archived from group: microsoft>public>exchange>admin

Martin Blackstone · Joined: 05 Aug 2007 Posts: 32

Hi Elias,
I appologize but Im not quite sure I understand your issue.
Is this what you are speaking about?
http://msexchangeteam.com/archive/2008/02/15/448140.aspx

"Elías Manchón" wrote in message @TK2MSFTNGP06.phx.gbl...
> Hi Folks,
>
> I can't install the SP1 of Exchange 2007. In Prepare's phase of wizard,
> the
> screen throught an error because of this equipe belong to domain that has
> a
> DNS domain of simple label.
>
> Is there some way to avoid this problem?, Must I try to change the DNS
> domain?, How do I make this?
>
> Thanks in Advance.
>
>

Elías Manchón · Joined: 05 Aug 2007 Posts: 3

Yes, I'm.

This link speak about my issue, but it says that Microsoft has changed the
error from a error to a Warning, I have Errors.

Is it possible that I have a old version of SP1 packet?.

Thanks.

Sorry, but my level of English not is very good.
"Martin Blackstone" escribió en el mensaje%23JeIHA.6092@TK2MSFTNGP06.phx.gbl...
> Hi Elias,
> I appologize but Im not quite sure I understand your issue.
> Is this what you are speaking about?
> http://msexchangeteam.com/archive/2008/02/15/448140.aspx
>
>
>
>
> "Elías Manchón" wrote in message
> @TK2MSFTNGP06.phx.gbl...
> > Hi Folks,
> >
> > I can't install the SP1 of Exchange 2007. In Prepare's phase of wizard,
> > the
> > screen throught an error because of this equipe belong to domain that
has
> > a
> > DNS domain of simple label.
> >
> > Is there some way to avoid this problem?, Must I try to change the DNS
> > domain?, How do I make this?
> >
> > Thanks in Advance.
> >
> >
>

Martin Blackstone · Joined: 05 Aug 2007 Posts: 32

Im wondering if the change is not available yet.
On deeper reading, I caught this:

How SP1 Setup is Being Changed
Microsoft is changing the Single-label domain pre-requisite check from an
Error, which blocks Setup, to a Warning, which cautions you strongly, but
allows Setup to proceed. While the exact wording has not been determined, it
will be similar to the following: "Setup has determined that this computer
belongs to a domain that has a single-label DNS name. This is not a
recommended configuration. You should plan to migrate to a fully-qualified
domain name. ". We'll inform you when this rule has been changed, and when
the update is available for download.

If you are installing Exchange 2007 SP1 from files on the local computer,
and the computer is connected to the Internet, Setup will automatically
download the new rule when it is available.

In addition to the prerequisite rule change, we're also going to modify the
ExBPA Health Check rule to mirror the modified Setup check.

"Elías Manchón" wrote in message @TK2MSFTNGP06.phx.gbl...
> Yes, I'm.
>
> This link speak about my issue, but it says that Microsoft has changed the
> error from a error to a Warning, I have Errors.
>
> Is it possible that I have a old version of SP1 packet?.
>
> Thanks.
>
>
> Sorry, but my level of English not is very good.
> "Martin Blackstone" escribió en el mensaje
> %23JeIHA.6092@TK2MSFTNGP06.phx.gbl...
>> Hi Elias,
>> I appologize but Im not quite sure I understand your issue.
>> Is this what you are speaking about?
>> http://msexchangeteam.com/archive/2008/02/15/448140.aspx
>>
>>
>>
>>
>> "Elías Manchón" wrote in message
>> @TK2MSFTNGP06.phx.gbl...
>> > Hi Folks,
>> >
>> > I can't install the SP1 of Exchange 2007. In Prepare's phase of wizard,
>> > the
>> > screen throught an error because of this equipe belong to domain that
> has
>> > a
>> > DNS domain of simple label.
>> >
>> > Is there some way to avoid this problem?, Must I try to change the DNS
>> > domain?, How do I make this?
>> >
>> > Thanks in Advance.
>> >
>> >
>>
>
>

Elías Manchón · Joined: 05 Aug 2007 Posts: 3

Sorry, I have erros yet.
The change is not available yet.

Greetings!

"Martin Blackstone" escribió en el mensaje@TK2MSFTNGP04.phx.gbl...
> Im wondering if the change is not available yet.
> On deeper reading, I caught this:
>
> How SP1 Setup is Being Changed
> Microsoft is changing the Single-label domain pre-requisite check from an
> Error, which blocks Setup, to a Warning, which cautions you strongly, but
> allows Setup to proceed. While the exact wording has not been determined,
it
> will be similar to the following: "Setup has determined that this computer
> belongs to a domain that has a single-label DNS name. This is not a
> recommended configuration. You should plan to migrate to a fully-qualified
> domain name. ". We'll inform you when this rule has been changed, and when
> the update is available for download.
>
> If you are installing Exchange 2007 SP1 from files on the local computer,
> and the computer is connected to the Internet, Setup will automatically
> download the new rule when it is available.
>
> In addition to the prerequisite rule change, we're also going to modify
the
> ExBPA Health Check rule to mirror the modified Setup check.
>
>
> "Elías Manchón" wrote in message
> @TK2MSFTNGP06.phx.gbl...
> > Yes, I'm.
> >
> > This link speak about my issue, but it says that Microsoft has changed
the
> > error from a error to a Warning, I have Errors.
> >
> > Is it possible that I have a old version of SP1 packet?.
> >
> > Thanks.
> >
> >
> > Sorry, but my level of English not is very good.
> > "Martin Blackstone" escribió en el mensaje
> > %23JeIHA.6092@TK2MSFTNGP06.phx.gbl...
> >> Hi Elias,
> >> I appologize but Im not quite sure I understand your issue.
> >> Is this what you are speaking about?
> >> http://msexchangeteam.com/archive/2008/02/15/448140.aspx
> >>
> >>
> >>
> >>
> >> "Elías Manchón" wrote in message
> >> @TK2MSFTNGP06.phx.gbl...
> >> > Hi Folks,
> >> >
> >> > I can't install the SP1 of Exchange 2007. In Prepare's phase of
wizard,
> >> > the
> >> > screen throught an error because of this equipe belong to domain that
> > has
> >> > a
> >> > DNS domain of simple label.
> >> >
> >> > Is there some way to avoid this problem?, Must I try to change the
DNS
> >> > domain?, How do I make this?
> >> >
> >> > Thanks in Advance.
> >> >
> >> >
> >>
> >
> >
>

Scott Schnoll [MSFT] · Joined: 05 Aug 2007 Posts: 89

We're working on the change, and hope to have it released soon! Thank you
for your patience.

--
Regards,

Scott Schnoll
Microsoft Corporation
This posting is provided "AS IS" with no warranties, and confers no
rights. Please do not send email directly to this alias. This alias is for
newsgroup purposes only.

"Elías Manchón" wrote in message
news:%23npQ$PWeIHA.148@TK2MSFTNGP04.phx.gbl...
> Sorry, I have erros yet.
> The change is not available yet.
>
> Greetings!
>
> "Martin Blackstone" escribió en el mensaje
> @TK2MSFTNGP04.phx.gbl...
>> Im wondering if the change is not available yet.
>> On deeper reading, I caught this:
>>
>> How SP1 Setup is Being Changed
>> Microsoft is changing the Single-label domain pre-requisite check from an
>> Error, which blocks Setup, to a Warning, which cautions you strongly, but
>> allows Setup to proceed. While the exact wording has not been determined,
> it
>> will be similar to the following: "Setup has determined that this
>> computer
>> belongs to a domain that has a single-label DNS name. This is not a
>> recommended configuration. You should plan to migrate to a
>> fully-qualified
>> domain name. ". We'll inform you when this rule has been changed, and
>> when
>> the update is available for download.
>>
>> If you are installing Exchange 2007 SP1 from files on the local computer,
>> and the computer is connected to the Internet, Setup will automatically
>> download the new rule when it is available.
>>
>> In addition to the prerequisite rule change, we're also going to modify
> the
>> ExBPA Health Check rule to mirror the modified Setup check.
>>
>>
>> "Elías Manchón" wrote in message
>> @TK2MSFTNGP06.phx.gbl...
>> > Yes, I'm.
>> >
>> > This link speak about my issue, but it says that Microsoft has changed
> the
>> > error from a error to a Warning, I have Errors.
>> >
>> > Is it possible that I have a old version of SP1 packet?.
>> >
>> > Thanks.
>> >
>> >
>> > Sorry, but my level of English not is very good.
>> > "Martin Blackstone" escribió en el mensaje
>> > %23JeIHA.6092@TK2MSFTNGP06.phx.gbl...
>> >> Hi Elias,
>> >> I appologize but Im not quite sure I understand your issue.
>> >> Is this what you are speaking about?
>> >> http://msexchangeteam.com/archive/2008/02/15/448140.aspx
>> >>
>> >>
>> >>
>> >>
>> >> "Elías Manchón" wrote in message
>> >> @TK2MSFTNGP06.phx.gbl...
>> >> > Hi Folks,
>> >> >
>> >> > I can't install the SP1 of Exchange 2007. In Prepare's phase of
> wizard,
>> >> > the
>> >> > screen throught an error because of this equipe belong to domain
>> >> > that
>> > has
>> >> > a
>> >> > DNS domain of simple label.
>> >> >
>> >> > Is there some way to avoid this problem?, Must I try to change the
> DNS
>> >> > domain?, How do I make this?
>> >> >
>> >> > Thanks in Advance.
>> >> >
>> >> >
>> >>
>> >
>> >
>>
>
>

Exchange 2007 OWA error - Server Error in '/' Application Server Error in '/' Application. The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following U

problem installing CA EX 2007 Hi, I having a problem with installing exchange 2007, When I was installing Exchange 2007 on the step of Client access role I get en Error How can I solve this issue and complet the install procces? This is a last part of Excange log: Finished installing

Exchange 2007 SP1 install error. I am receiving the following runtime error when trying to run the exchange 2007 SP1 setup. Any ideas on this one? Bill Event Type: Error Event Source: .NET Runtime 2.0 Error Reporting Event Category: None Event ID: 5000 Date: 12/2/2007 Time: 10:16:27 PM

Exchange 2007 error - EVENT ID 401 We are getting the following error, cannot find any information on it. We are NOT at service pack 1 for exchange 2007 Event Type: Error Event Source: Storage Group Consistency Check Event Category: Termination Event ID: 401 Date: 12/20/2007 Time: 11:38

Exchange 2007 New Mailbox Error I recently upgraded to Exchange 2007 from 2003. I've added a new user to the AD, and am now trying associate a mailbox with the user. From within the Exchange Management Console when I try to create a new mail box I get the following error: Access to the