Exchange Cluster Error

Felix · Joined: 06 Aug 2007 Posts: 3

I got this error message from my exchange standy server.
It seem try to access the active server disk resource.
Any idea? Thanks in advance.

Exchange 2000 SP3 x 2
Windows 2000 SP4 x 2
SAN disk

The description for Event ID ( 482 ) in Source ( ESE ) could not be found.
It contains the following insertion string(s): .
Information Store
3148

I:\EXCHSRVR\mdbdata\priv1.edb
8338673664 (0x00000001f1061000)
4096 (0x00001000)
-1022 (0xfffffc02)
21 (0x00000015)
The device is not ready.

Archived from group: microsoft>public>exchange2000>clustering

Adrian Grigorof · Joined: 05 Aug 2007 Posts: 1

Just make it more readable, the proper description for this event would be
the following:

Information Store (3148) An attempt to write to the file
"I:\EXCHSRVR\mdbdata\priv1.edb" at offset 8338673664 (0x00000001f1061000)
for 4096 (0x00001000) bytes failed with system error 21 (0x00000015): "The
device is not ready.". The write operation will fail with error -1022
(0xfffffc02). If this error persists then the file may be damaged and may
need to be restored from a previous backup.

There is a comment on
http://www.eventid.net/display.asp?eventid=482&eventno=1384&source=ESE98&phase=1
about this but it should be fixed by Exchange 2000 SP3... Are all the hard
disks ok? Any other errors in the event log?

--
Adrian Grigorof
www.eventid.net

"Felix" wrote in message @TK2MSFTNGP03.phx.gbl...
>I got this error message from my exchange standy server.
> It seem try to access the active server disk resource.
> Any idea? Thanks in advance.
>
> Exchange 2000 SP3 x 2
> Windows 2000 SP4 x 2
> SAN disk
>
> The description for Event ID ( 482 ) in Source ( ESE ) could not be found.
> It contains the following insertion string(s): .
> Information Store
> 3148
>
> I:\EXCHSRVR\mdbdata\priv1.edb
> 8338673664 (0x00000001f1061000)
> 4096 (0x00001000)
> -1022 (0xfffffc02)
> 21 (0x00000015)
> The device is not ready.
>

Felix · Joined: 06 Aug 2007 Posts: 3

Thanks.

"Adrian Grigorof" wrote in message @TK2MSFTNGP03.phx.gbl...
> Just make it more readable, the proper description for this event would be
> the following:
>
> Information Store (3148) An attempt to write to the file
> "I:\EXCHSRVR\mdbdata\priv1.edb" at offset 8338673664 (0x00000001f1061000)
> for 4096 (0x00001000) bytes failed with system error 21 (0x00000015): "The
> device is not ready.". The write operation will fail with error -1022
> (0xfffffc02). If this error persists then the file may be damaged and may
> need to be restored from a previous backup.
>
> There is a comment on
> http://www.eventid.net/display.asp?eventid=482&eventno=1384&source=ESE98&phase=1
> about this but it should be fixed by Exchange 2000 SP3... Are all the hard
> disks ok? Any other errors in the event log?
>
> --
> Adrian Grigorof
> www.eventid.net
>
>
> "Felix" wrote in message
> @TK2MSFTNGP03.phx.gbl...
>>I got this error message from my exchange standy server.
>> It seem try to access the active server disk resource.
>> Any idea? Thanks in advance.
>>
>> Exchange 2000 SP3 x 2
>> Windows 2000 SP4 x 2
>> SAN disk
>>
>> The description for Event ID ( 482 ) in Source ( ESE ) could not be
>> found. It contains the following insertion string(s): .
>> Information Store
>> 3148
>>
>> I:\EXCHSRVR\mdbdata\priv1.edb
>> 8338673664 (0x00000001f1061000)
>> 4096 (0x00001000)
>> -1022 (0xfffffc02)
>> 21 (0x00000015)
>> The device is not ready.
>>
>
>

Jamestechman · Joined: 05 Aug 2007 Posts: 14

Check your SAN controller logs to see if you have any hw issues.

James Chong
MCSE M+, S+, MCTS, Security+
msexchangetips.blogspot.com
ftp://mail.msexchange911.net/

Felix wrote:
> I got this error message from my exchange standy server.
> It seem try to access the active server disk resource.
> Any idea? Thanks in advance.
>
> Exchange 2000 SP3 x 2
> Windows 2000 SP4 x 2
> SAN disk
>
> The description for Event ID ( 482 ) in Source ( ESE ) could not be found.
> It contains the following insertion string(s): .
> Information Store
> 3148
>
> I:\EXCHSRVR\mdbdata\priv1.edb
> 8338673664 (0x00000001f1061000)
> 4096 (0x00001000)
> -1022 (0xfffffc02)
> 21 (0x00000015)
> The device is not ready.

Felix · Joined: 06 Aug 2007 Posts: 3

Thanks

"Jamestechman" wrote in message @m73g2000cwd.googlegroups.com...
> Check your SAN controller logs to see if you have any hw issues.
>
> James Chong
> MCSE M+, S+, MCTS, Security+
> msexchangetips.blogspot.com
> ftp://mail.msexchange911.net/
>
> Felix wrote:
>> I got this error message from my exchange standy server.
>> It seem try to access the active server disk resource.
>> Any idea? Thanks in advance.
>>
>> Exchange 2000 SP3 x 2
>> Windows 2000 SP4 x 2
>> SAN disk
>>
>> The description for Event ID ( 482 ) in Source ( ESE ) could not be
>> found.
>> It contains the following insertion string(s): .
>> Information Store
>> 3148
>>
>> I:\EXCHSRVR\mdbdata\priv1.edb
>> 8338673664 (0x00000001f1061000)
>> 4096 (0x00001000)
>> -1022 (0xfffffc02)
>> 21 (0x00000015)
>> The device is not ready.
>

An error occurred attempting to start the Cluster Service on Cluster Administrator The above error message I get and below that is the following lines The specified service done not exist as an installed service. Error ID: 1060 (0000424) I try to start the cluster service and the above message is what I get. I was

Exchange Cluster SAN Move We currently have 2 exchange servers in an cluster connected to an EMC SAN. Within the next week we will be migrating to a new SAN solution. I am wondering if anyone knows the best way to go about doing this migration. I know there will

Exchange Cluster - NO SMTP after failover Question to all the Exchange gurus out there. I have an Exchange cluster. Exchange 2000 on Windows 2000. After a failover to the passive node, (planned or not planned) SMTP mailflow does not work. Mail builds in the queues. Outlook is acces

Capacity of active/passive Exchange 2000 cluster Are there any good documents on how many mailboxes and how big the information stores can get on an Exchange 2000 cluster before you get into performance issues ? I have heard that the practical limit is approx 1,500 mailboxes but are thes

Exchange 2000 Post SP3 update rollup on cluster. I have problems with the Exchange Management Service on 1 node of a W2K Cluster. This is the node on which the post sp3 update rollup is installed. Can I uninstall the Exchange 2000 Post SP3 update rollup fix without creating any more trouble? Or can I e.